10-50t/h high performance cement clinker grinding plant
cement clinker grinding plant introduction:
cement clinker grinding plant is suitable for grinding the barite, limestone, kaolnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. The cement clinker grinding plant is possible to produce 30-80 mesh coarse powder through special device in the machine.
cement clinker grinding plant Features:
1. High passing ratio and small occupation area.
2. Automatic device and easy operation.
3. Small vibration and low noise.
4. It works with no pressure and dust spills.
5. High grinding efficiency and no pollution.
6. High classifying capacity and can save much time.
cement clinker grinding plant working process:
In the main frame, a 100-1500 kg powered pressure spring is fixed to the roller suspender. After the hammer mill is put into effect, the roller rotates around the main shaft, and rolls closely against the ring affected by the high pressure spring and centrifugal force. And its rolling pressure is 1.2 times higher than that of the cement plant Raymond grinder under the same power condition and the output is raised to a new degree.When the stuff is loaded into the grinding cavity, The cement clinker grinding plant is shoveled into the space between the roller and the ring for grinding.The resulted powder is routed to the separator along the circulation wind of the blower and the standard fine powder is guided to the cyclone collector as final product and large size stuff falls back to the grinder for regrinding. The circulation wind returns to the blower to repeat the above process and the remainder wind enters into bag deduster for purification.
When a certain degree of wear of roller and ring is caused, The cement clinker grinding plant is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, the stable output and fineness are ensured.
cement clinker grinding plant technical data:
| Name | MTM100 | MTM130 | MTM160 |
| Ring roll number(pcs) | 4 | 5 | 6 |
| Major diameter of roller(mm) | Φ310X170 | Φ410X210 | Φ440X270 |
| Inner diameter of roller(mm) | Φ950X170 | Φ1280X210 | Φ1600X270 |
| Revolving Speed(rmin) | 130 | 103 | 82 |
| Max feed size(mm) | <25 | <30 | <35 |
| Final size(mm) | 1.6-0.045
fineness can reach to 0.038 | 1.6-0.045
fineness can reach to 0.038 | 1.6-0.045
fineness can reach to 0.038 |
| Output(th) | 3-8 | 6-11 | 9-22 |
| Complete physical size(mm) | 7100×5900×7900 | 9200×7250×9700 | 12550×5700×8355 |
| Main unit motor | Model | Y225S-4 | Y280S-4 | Y315M-4 |
| Power(kw) | 37 | 75 | 132 |
| Rotate speed(rmin) | 1480 | 1480 | 1480 |
| Centrifugal induced draft fan motor | Model | Y225S-4 | Y280S-4 | Y315M-4 |
| Power(kw) | 37 | 75 | 132 |
| Rotate speed(rmin) | 1480 | 1480 | 1480 |
| Classifier speed regulating motor | Model | YCT200-4A | YCT200-4B | YCT250-4A |
| Power(kw) | 5.5 | 7.5 | 18.5 |
| Rotate speed(rmin) | 125-1250 | 125-1250 | 132-1320 |
| Elevator | Elevator model | TH210 | TH210 | TH315 |
| Motor model | Y100L2-4 | Y100L2-4 | Y112M-4 |
| Power(kw) | 3 | 3 | 4 |
| Rotate speed(rmin) | 1430 | 1430 | 1440 |
| Jaw Crusher | Jaw Crusher Model | PE200×350 | PE250×400 | PE250×750 |
| Main unit motor | Y160M-6 | Y180L-6 | Y200L2-6 |
| Power(kw) | 7.5 | 15 | 22 |
| Rotate speed(rmin) | 970 | 970 | 970 |
| Magnetic vibrating feeder | Main unit motor | GZ2F | GZ3F | GZ3F |
| Power(kw) | 0.15 | 0.2 | 0.2 |
Audited Supplier 
){kind=link}