Shanghai Zenith is a professional mining machine manufacturer with decades of years' experience. Our main product are grinding mills, Crushers, Dryer, Ball Mill, Sand making & washing machines, vibrating screens, etc.
Type
Powder Making Machine.
Max feeding size
<60 mm
Discharge size
0.95-0.033 mm
Roller and Ring material
65Mn, Mn13Cr2Cr or Chrominum Cast Steel
calcium carbonate plant Processed Materials
Calcium Carbonate Plant can be used to grind non-inflammable and non-explosive materials with Moh's hardness below 9.3 and moisture content below 6%, Such as: limestone, calcite, barite,dolomite, potassium feldspar, marble, talcum, gypsum, kaolin, bentonite, medical stone, rock phosphate,iron ore, quartz, active carbon, coal, ect.
calcium carbonate plant Working Principle:
Materials first enter jaw crusher to be crushed to smaller size. Then they are lift to storage room by elevator. Vibrating feeder will feed materials into calcium carbonate plant chamber evenly and gradually. After being grinded, the powder will be blowed to cyclone by blower. Then the material will be transferred to storage room through pipes, and then will be discharged as final products. The whole processof calcium carbonate plant works in a negative pressure environment. First, through pipes, the air from the blower enters the cyclone collector above the storage room along with powder, and then returns to the blower through return pipe. In the way, air can be recycled. There is a powder locking equipment under the cyclone in calcium carbonate plant , which isolates the outside positive air pressure and the negative air pressure inside cyclone. And this ensures high productivity. In addition, the residual air and dust under the main unit will be transferred to dust catcher equipment through pipes and be cleaned there. The clean air will be discharged so that environment will be protected.
calcium carbonate plant parameters:
| Name |
MTM100 |
MTM130 |
MTM160 |
| Ring roll number(pcs) |
4 |
5 |
6 |
| Major diameter of roller(mm) |
Φ310X170 |
Φ410X210 |
Φ440X270 |
| Inner diameter of roller(mm) |
Φ950X170 |
Φ1280X210 |
Φ1600X270 |
| Revolving Speed(rmin) |
130 |
103 |
82 |
| Max feed size(mm) |
<25 |
<30 |
<35 |
| Final size(mm) |
1.6-0.045
fineness can reach to 0.038 |
1.6-0.045
fineness can reach to 0.038 |
1.6-0.045
fineness can reach to 0.038 |
| Output(th) |
3-8 |
6-11 |
9-22 |
| Complete physical size(mm) |
7100×5900×7900 |
9200×7250×9700 |
12550×5700×8355 |
| Main unit motor |
Model |
Y225S-4 |
Y280S-4 |
Y315M-4 |
| Power(kw) |
37 |
75 |
132 |
| Rotate speed(rmin) |
1480 |
1480 |
1480 |
| Centrifugal induced draft fan motor |
Model |
Y225S-4 |
Y280S-4 |
Y315M-4 |
| Power(kw) |
37 |
75 |
132 |
| Rotate speed(rmin) |
1480 |
1480 |
1480 |
| Classifier speed regulating motor |
Model |
YCT200-4A |
YCT200-4B |
YCT250-4A |
| Power(kw) |
5.5 |
7.5 |
18.5 |
| Rotate speed(rmin) |
125-1250 |
125-1250 |
132-1320 |
| Elevator |
Elevator model |
TH210 |
TH210 |
TH315 |
| Motor model |
Y100L2-4 |
Y100L2-4 |
Y112M-4 |
| Power(kw) |
3 |
3 |
4 |
| Rotate speed(rmin) |
1430 |
1430 |
1440 |
| Jaw Crusher |
Jaw Crusher Model |
PE200×350 |
PE250×400 |
PE250×750 |
| Main unit motor |
Y160M-6 |
Y180L-6 |
Y200L2-6 |
| Power(kw) |
7.5 |
15 |
22 |
| Rotate speed(rmin) |
970 |
970 |
970 |
| Magnetic vibrating feeder |
Main unit motor |
GZ2F |
GZ3F |
GZ3F |
| Power(kw) |
0.15 |
0.2 |
0.2 |
Audited Supplier 
){kind=link}