2018 popular gypsum production and installation machine
gypsum production and installation machine introduction:
gypsum production and installation machine is widely used in making fine powder or micro powder, a new kind of machine for producing ultrafine powder. ultrafine grinding mill is mainly used for grinding the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished product from ultrafine grinding mill can be adjusted between 325-2500 mesh.
gypsum production and installation machine working principle
After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, edge of then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe. When the ultrafine grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.The high-pressure air blower constantly inhales air within the ultrafine grinding mill and, in turn, the air flow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the ultrafine grinding mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall an exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
gypsum production and installation machine technical data:
|Number of roller (piece)||Ring diameter (mm)||Number of ring (piece)||Max. inlet size (mm)||Final size (mesh)||Capacity (kg/h)||Main equipment rotate speed (r/min)|
|Motor of main machine||Model||-||Y250M-4||Y280S-8||Y2-315L-6|
|Motor of elevator||Model||-||Y100L-4||Y100L-4||Y100L-4|
|Motor of blower||Model||-||Y225M-2||Y225M-2||Y280S-2|
|Electromagnetic Vibrating feeder||Model||-||GZ1F||GZ1F||GZIF|
|Note: If there is any change of above specification, it is all according to the booklet with machine.|