Introduction of Gold/ Iron/ Manganese Rock Stone Hammer Crusher for Ore Mining:
Hammer crusher is primary crushing equipment which could crush the materials from 600-1800mm to 20mm or smaller in once. It is applied to cement, chemicals, electric power, metallurgy and so on industries middle hardness materials such as limestone, slag, carbon coke, coal and so on materials middling and fine crushing.
This series hammer crusher is small volume, light, simple structure, easy operation and maintenance, high crushing ratio, low over-crushing ratio, average final product particle size, high capacity and so on characters. It is applied to crush brittleness, middle hardness, strength of pressure-resistant is 150MPa each kinds of materials. The hammer crusher feature hammer head adopt new craftsmanship casting, wear-resistant and impact-resistant.
Working principle of Gold/ Iron/ Manganese Rock Stone Hammer Crusher for Ore Mining:
In the hammer crusher, the motor drives the rotor to rotate at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them, the crushed products meeting the required size can be discharged by the outlet and become the final products.
Features of Gold/ Iron/ Manganese Rock Stone Hammer Crusher for Ore Mining:
1. High quality chrome hammer, abrasion resistance achieving the advanced level in country;
2. Specially designing tooth impact plate;
3. Adjustable discharge open;
4. Low power consumption unit;
5. Big crushing ratio
6. Very long operation life
7 Simple structure, reliable operation
8. Easy maintenance, low operation cost
9. Good operating safety, lower energy cost
10. High economic efficiency, low cost, fast recovery
Technical data of Gold/ Iron/ Manganese Rock Stone Hammer Crusher for Ore Mining:
| Name & Model |
HM4008-75 |
HM4012-90 |
HM4015-132 |
| Rotor diameter(mm) |
750 |
900 |
1150 |
| Rotor length(mm) |
800 |
1200 |
1500 |
| Rotor speed(rm) |
800-1000 |
800-1000 |
550-800 |
| Feeding size(mm) |
320×930 |
400×1200 |
500×1500 |
| Max feed size(mm) |
<30 |
<40 |
<50 |
| Discharge size(mm) |
0-3 |
0-3 |
0-8 |
| Theory processing capacity(th) |
8-15 |
15-40 |
40-70 |
| Motor |
Model(Standard) |
Y280S-4 |
Y280M-4 |
Y315L2-6 |
| Power(kw) |
75 |
90 |
132 |
| Rotate speed(rm) |
|
|
|
| Hammer number(pcs) |
18 |
32 |
32 |
| Dimension(L×W×Hmm) |
2130×1665×1610 |
2840×2100×2020 |
3720×2650×2540 |
){kind=link}
){kind=link}