2018 Hot sale Stone Powder Pulverizer (3R, 4R, 5R, 6R)
Description of Powder Pulverizer:
Powder Pulverizer (Raymond Mill) is used to grind barite, calcite, potash feldspar, talcum, marble, limestone, ceram and slag below scale 7 of Moth's hardness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, building material, chemical engineering and metallurgy for powder generation and processing. The product size is adjustable on required in the range of 80-325 meshes. Some of the materials up to 2500 mesh.
Powder Pulverizer Structural characteristics:
The whole Powder Pulverizer is of a standing structure, all the finished particles, have a good uniformity of fineness, with passing screen rate as high as 98%.
Application of Stone Powder Pulverizer:
This series Stone Powder Pulverizer are mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. Grinder machine can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.
Stone Powder Pulverizer Features:
1. Bevel gear integral transmission: The traditional Stone Powder Pulverizer needs decelerator and ratcheting to drive the main shaft that increase the centering difficulty and is easy to bring noise as well as reduce the efficiency. MTW series Stone Powder Pulverizer adopt bevel gear integral transmission that compact the whole structure and simplify the installation as well as improve the efficiency.
2. Inner light-oil lubrication system: The traditional Stone Powder Pulverizer lubrication adopts grease lubrication which increases the resistance of lubrication, creates high inherent temperature and shortens the service life of bearing. MTW series Stone Powder Pulverizer adopt light-oil lubrication achieve the lubrication of bearing without oil pump and lubrication station.
3. Arc whirl tube: The traditional Stone Powder Pulverizer adopt board-type whirl tube that increases the resistance, reduces the performance, and stops the air flow and so on. MTW series Stone Powder Pulverizeradopt arc whirl tube reduce the resistance and avoid the air-stop and so on.
4. Curved surface shovel with changeable edge: The traditional Stone Powder Pulverizer adopt quick wear edge and edge combine with shovel. If the edge is worn, all of the shovel should be changed that increase the cost and the stop time. The edge of MTW series Stone Powder Pulverizer adopts wearable alloy materials which improve the service life. The Changeable edge is easy to change that save time and cost. The traditional flat shovel make the materials accumulate in one level that reduces the ring and roller service life. The curved surface shovel makes a vertical material liner which increases the working face and capacity.
5. Insolating type cyclone collector: Adopt insolating structure between the inner core and mixed air flow that improve the classifying efficiency and precision.
6. non-resistance inlet shell: Traditional observation door of shell protrude that makes the inner surface is not so smooth which brings eddy effect and increase the consumption. MTW series Stone Powder Pulverizer adopts the same curved surface which avoids the eddy effect.
7. Fine appearance: MTW series Stone Powder Pulverizer not only adopt many advanced structure but also optimize the appearance.
Stone Powder Pulverizer technical data:
| Name & Model |
MTW110 |
MTW138 |
MTW175 |
MTW215 |
| Ring Roller Number(pcs) |
4 |
4 |
5 |
5 |
| Major diameter of roller(mm) |
360×190 |
460×240 |
520×280 |
640x 320 |
| Inner diameter of roller (mm) |
1100×190 |
1380×240 |
1750×280 |
2150x 320 |
| Revolving Speed(rmin) |
120 |
96 |
75 |
65 |
| Max.Feed Size(mm) |
<30 |
<35 |
<40 |
<50 |
| Final size(mm) |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.075,
fineness can reach to 0.038 |
| Capacity(th) |
3.5-10 |
6.5-15 |
13-20 |
30-45 |
| Overall dimension(mm) |
8625×7933×8642 |
10920×9470×10227 |
12275×9555×9916 |
14730x 10860x 10341 |
| Main unit motor |
Model |
Y280M-6 |
Y315M-6 |
Y355M2-8 |
Y3-355-4-8 |
| Power(kw) |
55 |
90 |
160 |
280 |
| Rotate Speed(rmin) |
980 |
990 |
740 |
740 |
Classifier speed regulating motor
(variable frequency motor) |
Model |
Y132M-4 |
Y180M-4 |
Y200L-4 |
YVP280M-4 |
| Power(kw) |
7.5 |
18.5 |
30 |
90 |
| Rotate Speed(rmin) |
1440 |
1470 |
1470 |
1470 |
| Centrifugal induced draft fan motor |
Model |
Y250M-4 |
Y315-4 |
Y315L2-4 |
Y315L2-4 |
| Power(kw) |
55 |
110 |
200 |
315 |
| Rotate Speed(rmin) |
1480 |
1480 |
1480 |
1480 |
| Elevator |
Bucket Model |
TH210 |
TH315 |
TH315 |
TB315 |
| Motor Model |
Y100L2-4 |
Y112M-4 |
Y112M-4 |
Y160M-4 |
| Motor Power(kw) |
3 |
3 |
4 |
11 |
| Rotate Speed(rmin) |
1430 |
1430 |
1440 |
1440 |
| Jaw Crusher |
Model |
PE250×400 |
PE250×750 |
PE250×750 |
PC1010 |
| Motor Model |
Y180L-6 |
Y200L2-6 |
Y200L2-6 |
Y315M2-6 |
| Power(kw) |
15 |
22 |
22 |
110 |
| Rotate Speed(rmin) |
970 |
970 |
970 |
990 |
| Magnetic Vibrating Feeder |
Model |
GZ2F |
GZ3F |
GZ4F |
GZ5F |
| Power(kw) |
0.15 |
0.2 |
0.45 |
0.65 |
Audited Supplier 
){kind=link}