Introduction of Rod mill:
Rod mill is the most widely used kind of grinding equipment. Zenith Rod mill are widely used in various types of ores' benefication, electricity, cement and chemical industries. With high comminution ratio,it can carry out dry or wet pulverizing and can meet demand for sustainable large-scale production. The most widely used in the production of a variety of ores are wet overflow ball mill and wet grate ball mill.
What is the application area of Rod mill?
The ball mill is key equipment in grinding industry, especially in mineral ore dressing plants. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc.
What is the working principle of Rod mill?
The ball mill is horizontal rotating devices transmitted by the outer gear. The ball mill has two warehouses. The materials are transported by feeder to the grinding chamber through the quill shaft spirally, then enter the first warehouse. In the warehouse, there is a ladder scale board or ripple scale board. Steel balls of different specifications are installed in the scale board. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and then fall to grind and strike the material. After being grinded coarsely in the first warehouse, the material then enters into the second warehouse for regrinding. The above action repeats constantly till the size of materials reaches the required fineness. In the end, the powder is discharges by output material board and the end products are completed.
What is the features of Rod mill?
1.Traditional sliding bearings are replaced by double row roller bearings in small and medium size ball mills to reduce energy consuming.
2.Large ball mills adopt pitot pressure or hydrostatic bearings.
3.Air clutch system for starting the motor safely.
4.Alternative synchronous or asynchronous motor.
5.Low speed driving unit with Lifting device, convenient for maintenance.
6.New Endurable wearing parts to increase service life of vulnerable parts.
7.Alternative PLC automatic control system Optional Accessories ( drum sieve, Hydraulic wrench mobile feeding settings).
What is the parameter of Rod mill?
| Model |
Barrel size(mm) |
Effective volume (m3) |
Bar weight(T) |
Rotating speed(r/min) |
Power(KW) |
Discharge size(mm) |
Capacity(t/h) |
Weight(T) |
| MB0924 |
900×2400 |
|
3.1 |
29 |
22 |
2.5-0.2 |
2.9-10 |
6.6 |
| MB1224 |
1200×2400 |
|
6.5 |
27 |
37 |
2.5-0.2 |
5-13 |
13.5 |
| MB1530 |
1500×3000 |
5 |
8 |
23 |
75 |
2.5-0.2 |
5.5-12 |
16.71 |
| MB1830 |
1800×3000 |
6.5 |
17 |
22.8 |
130 |
2.5-0.2 |
9.5-20 |
29.8 |
| MB2136 |
2100×3600 |
11 |
28 |
20.9 |
210 |
2.5-0.2 |
14.8-35 |
49.4 |
| MB2436 |
2400×3600 |
14.6 |
37 |
19 |
280 |
2.5-0.2 |
26-55 |
61 |
| MB2740 |
2700×4000 |
20.5 |
47 |
17.5 |
400 |
5-0.8 |
50-165 |
84.3 |
| MB3040 |
3000×4000 |
25.9 |
50 |
16.2 |
500 |
5-0.8 |
62-206 |
130 |
| MB3245 |
3200×4500 |
33 |
56 |
15.5 |
630 |
5-0.8 |
70-228 |
138 |
| MB3654 |
3600×5400 |
55 |
94 |
14.5 |
1000 |
5-0.8 |
103-340 |
192 |
Audited Supplier 
){kind=link}