1-10tph LM series quicklime Vertical grinding mill
quicklime Vertical grinding mill is a new mill of high efficiency and low consumption, studied by numbers of our engineers, for solving the difficulty of high energy consumption in mill industry. It adopts new grinding principle, new structure, strong bearing materials, and absorbing lots of technical essence of mill. Therefore the performance of vertical mill indicators is over traditional mills greatly. Especially, it is very efficient for crushing high hardness and hardworking materials and it can work under both dry and wet condition.
quicklime Vertical grinding mill characteristics:
Small metal worn, little dust, simple and firm structure, and easy maintenance. It is a revolutionary technical change in mill industry. Customer can benefit much from it and it really fulfills the desire of industrial fields - high efficiency and low consumption.
quicklime Vertical grinding mill Technical Advantages:
1. Outstanding design.
2. High productivity.
3. High reduction ratio
4. Long service time
5. Environmental protection
quicklime Vertical grinding mill technical data:
| Model |
LM130K |
LM150K |
LM170K |
LM190K |
LM220K |
LM130M |
LM150M |
LM170M |
LM190M |
LM220M |
LM130N |
LM150N |
LM170N |
LM190N |
LM220N |
| Wheel diameter(mm) |
1300 |
1500 |
1700 |
1900 |
2200 |
1300 |
1500 |
1700 |
1900 |
2200 |
1300 |
1500 |
1700 |
1900 |
2200 |
| Output (th) |
10-30 |
13-40 |
18-57 |
23-72 |
36-110 |
10-15 |
16-22 |
20-28 |
26-35 |
35-50 |
5-14 |
7-20 |
8-27 |
9-30 |
18-55 |
| Finish fineness |
µm |
170-45 |
170-45 |
170-45 |
170-45 |
170-45 |
|
170-45 |
170-45 |
170-45 |
170-45 |
170-45 |
| Mesh |
80-325 |
80-325 |
80-325 |
80-325 |
80-325 |
|
80-325 |
80-325 |
80-325 |
80-325 |
80-325 |
| Coal powder fineness (R0.08) |
|
5-20% |
5-20% |
5-20% |
5-20% |
5-20% |
|
| Coal powder moisture (%) |
|
<1% |
<1% |
<1% |
<1% |
<1% |
| End product moisture (%) |
≤1% |
≤1% |
≤1% |
≤1% |
≤1% |
|
≤1% |
≤1% |
≤1% |
≤1% |
≤1% |
| Grinding material particle size D80 (mm) |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
<10 |
| Grinding material max feed size(mm) |
<38 |
<40 |
<42 |
<45 |
<50 |
<38 |
<40 |
<42 |
<45 |
<50 |
<38 |
<40 |
<42 |
<45 |
<50 |
| Moisture of grinding material not to dry (%) |
<4% |
<4% |
<4% |
<4% |
<4% |
|
<4% |
<4% |
<4% |
<4% |
<4% |
| Matieral moisture of into mill (%) |
|
<15% |
<15% |
<15% |
<15% |
<15% |
|
| Moisture of grinding material need to dry (%) |
4%-15% |
4%-15% |
4%-15% |
4%-15% |
4%-15% |
|
4%-15% |
4%-15% |
4%-15% |
4%-15% |
4%-15% |
| Into mill air temperature (ºC) |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
| Out of the mill air temperature (ºC) |
70-95 |
70-95 |
70-95 |
70-95 |
70-95 |
75-95 |
75-95 |
75-95 |
75-95 |
75-95 |
70-95 |
70-95 |
70-95 |
70-95 |
70-95 |
| Raw coal hardgrove grindability index (HGI) |
|
>55 |
>55 |
>55 |
>55 |
>55 |
|
| Main motor power (kw) |
200 |
280 |
400 |
500 |
800 |
185 |
250 |
315 |
400 |
500 |
200 |
280 |
400 |
500 |
800 |
| Contour dimension |
Length (mm) |
5520 |
6550 |
7170 |
7580 |
8080 |
5520 |
6550 |
7170 |
7580 |
8080 |
5520 |
6550 |
7170 |
7580 |
8080 |
| Width (mm) |
2500 |
3070 |
3460 |
3320 |
4660 |
2500 |
3070 |
3460 |
3320 |
6700 |
2500 |
3070 |
3460 |
3320 |
4660 |
| Height (mm) |
7060 |
7560 |
8300 |
8960 |
9020 |
7060 |
7560 |
8300 |
8960 |
9020 |
7060 |
7560 |
8300 |
8960 |
9020 |
){kind=link}