50-500tph Stone Crusher Machine with Mine Crusher for Sand Making Machine
1.Introduction of Sand Making Machine
Sand Making Machine ,also called Sand Making Machine and rubble shaping machine, is a kind of crusher impacted by the material themselves . It is applied in sand making industry and other building industries.
2. Working Principle of Sand Making Machine
The material falls into the high-speed turning impellers from the top of machine and crushes with the materail distributed around the impeller under the effect of high speed centrifugal force.After the impact with each other ,the material is crushed between impeller and cavity and is discharged from the bottom.The material can be milled twice or more times in the whirlpool cavity ,the crushed materials will be excluded through the tottom airflow self-circulation in the whirpool cavity can eliminate the dust pollution well
3.Features of Sand Making Machine
1, Simple and reasonable structure, lost running cost.
2. High crushing rate, energy-saving.
3. It has fine crush and coarse grinding function.
4. It is little affected by the moisture content, and the content can get up to about 8%.
5. It is suitable to crush midium hard, hard special materials.
6. Excellent product of cubic shape, and small fraction of elongated flaky particle shape.
7. Small wear from Impeller liner, and easy maintenance.
8. Working Noise is lower than 75 decibel, dust pollution.
4.The Application of Sand Making Machine
1. Sand Making Machine also named Vertical Shaft Impact Crusher is of high-power and low-consumption, which is designed depending on several years hard work and study of mechanical mining equipment.
2. Sand Making Machine absorbed the advanced technology, now is of the international level.
3. Sand Making Machine plays an important role in crushing minerals into pieces.
4. Sand Making Machine is widely used in all kinds of mineral,cement,corhart,carborundum grain,glass raw material, machine making construction sand, stone stock and all kinds of metallurgy slag,especially carborundum, sintered bauxite, magnesite,and materials with features of very hard and anticorrosion.
5. The Sand Making Machine is more productive than other kind of crushers.
5.Sand Making Machine parameters:
| Model |
Feed at center&sides |
Feed at center |
Soft Material |
Hard Material |
REV (r/min) |
Power (kw) |
Motor Model |
Machine Size (mm) |
| Capacity (t/h) |
Max.Feeding (mm) |
| B-7611 |
120-180 |
60-90 |
35 |
30 |
1700-1890 |
4-55×2 |
Y250M-4/55 |
4100×2250×2258 |
| B-8518 |
200-260 |
100-130 |
40 |
35 |
1520-1690 |
4-90×2 |
Y280M-4/90 |
4140×2280×2425 |
| B-9526 |
300-380 |
150-190 |
45 |
40 |
1360-1510 |
4-132×2 |
Y315M-4/132 |
4560×2450×2780 |
| B-1140 |
450-520 |
225-260 |
50 |
45 |
1180-1310 |
4-200×2 |
Y315L2-4/200 |
5100×2690×3200 |
Audited Supplier 
){kind=link}
){kind=link}