Hot Sale VSI5X sand making machine price
sand making machine price introduction
sand making machine price is widely used in fine crushing and rough grinding of metal, mineral, building aggregate, concrete, anti-fire material, glass raw material, manufactured sand and all kinds of metallurgical slug. It is also can utilized in shaping of high rank road surface. Compared with other kind of crusher, it is more advanced in intermediate hard, extra hard and abrasive material crushing, such as gravel, quartz, sandstone, basalt, silicon carbide, diamond grain and sintered bauxite.
sand making machine price Features:
1. Deep cavity type rotor after optimization design, through material quantity increases by about 30%.
2. High sand-making ratio; good size and shape.
3. With functions of finely, coarse grinding.
4. Week guard can use back up and down after partial wear, improve material utilization, can improve the service life 48% longer.
5. Little affected by the material moisture content; water content up to 8% is available.
6. "Stone hit stone", "stone hit the iron" easy conversion; high efficiency and energy saving, high crushing ratio.
7. Cube structure, high bulk density, and small iron contamination.
8. Less wear of impeller from the lining, easy maintenance.
9. Sand Crusher Low wearing parts consumption design of the best material impact angle of crushing cavity. Less friction between wear parts, 30% lower than conventional equipment running cost.
sand making machine price Operating Principle
Material falls down to impellor cavity. Under great centrifugal force, it hits material that coming downwards. After hitting each other, they force a vortex between impellor and shell, and hit each other several times, finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported by conveyor belt. However overlarge material will go back to sand maker to be recrushed. Output sizes can be made according to customer's requirement.
sand making machine price Parameters:
| Model |
Feed at center&sides |
Feed at center |
Soft Material |
Hard Material |
REV (r/min) |
Power (kw) |
Motor Model |
Machine Size (mm) |
| Capacity (t/h) |
Max.Feeding (mm) |
| B-7611 |
120-180 |
60-90 |
35 |
30 |
1700-1890 |
4-55×2 |
Y250M-4/55 |
4100×2250×2258 |
| B-8518 |
200-260 |
100-130 |
40 |
35 |
1520-1690 |
4-90×2 |
Y280M-4/90 |
4140×2280×2425 |
| B-9526 |
300-380 |
150-190 |
45 |
40 |
1360-1510 |
4-132×2 |
Y315M-4/132 |
4560×2450×2780 |
| B-1140 |
450-520 |
225-260 |
50 |
45 |
1180-1310 |
4-200×2 |
Y315L2-4/200 |
5100×2690×3200 |
Audited Supplier 
){kind=link}