S Series Cone Crusher/Cone Crusher Machine
The S series Type cone crusher is the cone crusher which is the earliest appearance in the world, and it is used widest and larger quantity crush mechanism in present. with the improvement of the series of S series cone crusher, their structure is more perfect and the technology parameter is more advanced, so these crushers have excellent performance in the aspects of manufacture, installation, use and maintenance etc.
S Series Cone Crusher/Cone Crusher Machine Main Features:
1. Many cavity types to meet customer's different requirements.
2. Credible dry oil seal prolongs the cycle of the lube and use life.
3. Special material used in key assemblies to support large crush power.
4. High productivity and efficiency.
5. Low cost of daily run and maintenance.
Working Principle of S Series Cone Crusher/Cone Crusher Machine:
Cone crusher materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the diacharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequantly the output size is determined.
S Series Cone Crusher/Cone Crusher Machine technical data:
Model |
Cavity |
Recommended Minimum Discharge Setting A (mm) |
Feed Opening With Min. Recommended Discharge Setting A(mm) |
Capacities In Tons Per Hour Passing Through The Crusher At Indicated Discharge |
Power(KW) |
Opening Side" B" |
Closed Side" B" |
36" (3' ) |
Fine |
9 |
102 |
83 |
45-93 |
75 |
Coarse |
13 |
175 |
159 |
59-165 |
Extra Coarse |
25 |
178 |
163 |
129-198 |
51" ( 4.25' ) |
Fine |
13 |
137 |
109 |
106-183 |
185 |
Medium |
16 |
210 |
188 |
132-304 |
Coarse |
19 |
241 |
216 |
171-349 |
Extra Coarse |
25 |
259 |
238 |
230-450 |
66" ( 5.5' ) |
Fine |
15 |
209 |
188 |
180-324 |
240 |
Medium |
22 |
241 |
213 |
252-437 |
Coarse |
25 |
269 |
241 |
299-634 |
Extra Coarse |
38 |
368 |
331 |
431-680 |
84" ( 7' ) |
Fine |
19 |
278 |
253 |
381-1028 |
400 |
Medium |
25 |
334 |
303 |
605-1284 |
Coarse |
31 |
369 |
334 |
786-1450 |
Extra Coarse |
38 |
460 |
425 |
886-1637 |