Complete Cement Clinker Grinding Production Line 50mm T/H
Complete Cement Clinker Grinding Production Line 50mm T/H is the newest grinding machine, which integrates the advanced international technology and years of mill-producing experience. It is an ideal equipment that integrates crushing, drying, grinding and grading conveyor all together.
Complete Cement Clinker Grinding Production Line 50mm T/H can be widely used in cement making, power, metallurgy, chemical and non- metalliferous ore industries. It is used to grind lumpy, granular and powdery materials to the required size.
Complete Cement Clinker Grinding Production Line 50mm T/H Technical Advantages:
1. Low invest cost
2. Low run cost
3. High drying ability
4. Easy to operate, reliable performance
5. Stable quality
6. Convenient to maintain
7. Environmental protection
Complete Cement Clinker Grinding Production Line 50mm T/H Work principle
Raw material feed into discharge pipe through rotary discharger.Discharge pipe enter into the Vertical Mill through the side or the center of the center of the separator.Material will fall into the center of mill disc with the help of gravity and air flow.Mill disc connect with the reducer constantly.Constant speed rotation of mill disc.There inclined mill roller will bite material and pulverize.Grind material with the function of pressure and friction.
Centrifugal force will disc will make pulverized material at the edge of mill disc from the middle of mill disc.Material off mill disc will enter into hot gas in the mill through air ring.Via the middle of the mill shell and enter into the separator.During the process, material will exchange hot gas.The moisture will be evaporated.The rest moisture can reach 1%. Unpulverized material as request will be selected by the Separator and send back mill disc.
Complete Cement Clinker Grinding Production Line 50mm T/H technical data:
| Model |
LM130K |
LM150K |
LM170K |
LM190K |
LM220K |
LM240K |
| Turnplate diameter (mm) |
1300 |
1500 |
1700 |
1900 |
2200 |
2400 |
| Capacity (t/h) |
10~30 |
13~40 |
18~57 |
23~72 |
36~114 |
41~128 |
| Final product size |
μ m |
170~45 |
170~45 |
170~45 |
170~45 |
170~45 |
170~45 |
| mesh |
80~325 |
80~325 |
80~325 |
80~325 |
80~325 |
80~325 |
| Final product water percentage |
≤ 1% |
≤ 1% |
≤ 1% |
≤ 1% |
≤ 1% |
≤ 1% |
| Max. input size (mm) |
< 38 |
< 40 |
< 42 |
< 45 |
< 50 |
< 55 |
| Best water percentage of raw material |
< 4% |
< 4% |
< 4% |
< 4% |
< 4% |
< 4% |
| Drying needed if water percentage is more than |
< 15% |
< 15% |
< 15% |
< 15% |
< 15% |
< 15% |
| Input wind temperature (º C) |
< 350 |
< 350 |
< 350 |
< 350 |
< 350 |
< 350 |
| Output wind temperature ( º C ) |
70~95 |
70~95 |
70~95 |
70~95 |
70~95 |
70~95 |
| Main motor power (KW) |
185~220 |
250~280 |
355~400 |
450~500 |
710~800 |
800~900 |
| Overall dimension |
L mm |
3500 |
4200 |
4700 |
8500 |
10200 |
11700 |
| W mm |
3400 |
3900 |
4500 |
5600 |
6700 |
7700 |
| H mm |
5800 |
7100 |
8300 |
8800 |
10600 |
12200 |
| Weight (t) |
48 |
75 |
90 |
100 |
125 |
160 |
Note: 1. Input material should be brittle material with Mohs hardness not more than seven.
2. Hot air is needed only when there is a requirement that water percentage of final product should be less than raw material.
3. If the material is hard to grind, motor power take large value.
Complete Cement Clinker Grinding Production Line 50mm T/H Specification
| Model |
LM130M |
LM150M |
LM170M |
LM190M |
LM220M |
LM240M |
| Turnplate diameter (mm) |
1300 |
1500 |
1700 |
1900 |
2200 |
2400 |
| Capacity (t/h) |
10~15 |
16~22 |
20~28 |
26~35 |
35~45 |
40~50 |
| Coal powder fineness (R0.08) |
< 15% |
< 15% |
< 15% |
< 15% |
< 15% |
< 15% |
| Coal powder water percentage |
< 1% |
< 1% |
< 1% |
< 1% |
< 1% |
< 1% |
| Max. input size (mm) |
< 38 |
< 40 |
< 42 |
< 45 |
< 50 |
< 55 |
| Input material water percentage |
< 15% |
< 15% |
< 15% |
< 15% |
< 15% |
< 15% |
| Input wind temperature ( º C ) |
< 350 |
< 350 |
< 350 |
< 350 |
< 350 |
< 350 |
| Output wind temperature (º C) |
75~95 |
75~95 |
75~95 |
75~95 |
75~95 |
75~95 |
| Raw coal Hardgrove grindability index (HGI) |
> 55 |
> 55 |
> 55 |
> 55 |
> 55 |
> 55 |
| Main motor power (KW) |
185 |
250 |
315 |
400 |
500 |
560 |
| Overall dimension |
L mm |
3500 |
4200 |
4700 |
8500 |
10200 |
11700 |
| W mm |
3400 |
3900 |
4500 |
5600 |
6700 |
7700 |
| H mm |
5800 |
7100 |
8300 |
8800 |
10600 |
12200 |
| Weight (t) |
46 |
75 |
94 |
100 |
122 |
157 |
){kind=link}