Engineer Oversea Service gypsum powder plant machinery with 1-50tph
gypsum powder plant machinery Brief introduction:
gypsum powder plant machinery--the latest grinding equipment, with its own knowledge patents, have reached modern advanced level in the world. This series mill absorbing the European advanced technology and many engineers' ripe experience, combining the actual requirement and proposal of our 9518 customers', have been developed on the basis of our professional engineers' hard researching. This new type calcium carbonate production line adopts bevel gear overall drive, inner automatic Thin-Oil lubricating system, arc air channel and several latest patent technology.
The new technology of gypsum powder plant machinery as below:
1) Bevel gear overall drive: the gypsum powder plant machinery is driven by speed reducer and coupling. It is hard to be installed. And there will be too much noisy, and the efficiency is lower. MTW series gypsum powder plant machinery is driven by bevel gear, so its structure is compacter, easy to be installed and more efficient.
2) Inner automatic Thin-Oil lubricating system: the traditional mill adopts grease lubrication, so the lubricating resistance is stronger, the temperature will be higher soon, the bearing life is shorter. MTW series gypsum powder plant machinery adopts inner L.O. pumps, so the main shaft bearing and bevel gear can be lubricated without an additional lubrication system.
3) Arc air channel: all of the air channel of traditional gypsum powder plant machinery is upright board type. In this case, there will be stronger resistance when the air impacts the air channel board, and the energy of collisions of air molecules loss heavily, as a result, the air channel will be jammed easily because of the eddy air flow. MTW series calcium carbonate production line adopts a cambered air channel, the tangential air goes into air channel easily because there is small resistance. And the inner outlet is very good for the grinded material to spread around and avoid grinding material jammed.
4) Cambered shovel with renewable edge: The traditional shove is integral and edge always be worn out quickly, so you have to renew it in short time which affects the working time and wastes too much steel. The shovel edge of MTW series calcium carbonate production line adopts high wearable limit alloy, its life will be longer. You only want to change the edge, not the whole shovel. so the steel material is saved. In addition, because the traditional shovel is plane type, the grinded material stacks on the same plane when it is scooped up. So the middle parts of the roller is worn out heavily. But the cambered shovel can scoop up the grinded material in the same vertical plane, that makes the rollers and ring worn equally. At the same, the grinding efficiency is higher and capacity is higher;
5) Separated cyclone: There is a separated structure between inner piping and mixed air and powder. The efficiency and precision of classifying is promoted highly;
gypsum powder plant machinery's Usage:
This gypsum powder plant machinery is mainly used to grind minerals in the field of metallurgy, construction, chemical industry, mining, etc., including lime stone, quartz, feldspar, calcite, talcum, barite, fluorite, thulium,marble, porcelain, bauxite, manganese, iron ore, copper ore, phosphorite, ferric oxide(red), zirconium, slag, active carbon, dolomite, granite, ferric oxide(yellow), bean cake, fertilizer, compound fertilizer, coal ash, soft coal, lignite, magnesite, chrome oxide, gold mine, red mud, clay, kaolin, coke, china clay, kyanite, fluorite, rhyolite, greenstone, shale, basalt, gypsum, graphite, carborundum, heat-retentive materials which are non-flammable, non-explosive, with Moh's hardness below 9 and moisture below 6%.
gypsum powder plant machinery parameters:
| Name & Model |
MTW110 |
MTW138 |
MTW175 |
MTW215 |
| Ring Roller Number(pcs) |
4 |
4 |
5 |
5 |
| Major diameter of roller(mm) |
360×190 |
460×240 |
520×280 |
640x 320 |
| Inner diameter of roller (mm) |
1100×190 |
1380×240 |
1750×280 |
2150x 320 |
| Revolving Speed(rmin) |
120 |
96 |
75 |
65 |
| Max.Feed Size(mm) |
<30 |
<35 |
<40 |
<50 |
| Final size(mm) |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.075,
fineness can reach to 0.038 |
| Capacity(th) |
3.5-10 |
6.5-15 |
11-25 |
30-45 |
| Overall dimension(mm) |
8625×7933×8642 |
10920×9470×10227 |
12275×9555×9916 |
14730x 10860x 10341 |
| Main unit motor |
Model |
Y280M-6 |
Y315M-6 |
Y355M2-8 |
Y3-355-4-8 |
| Power(kw) |
55 |
90 |
160 |
280 |
| Rotate Speed(rmin) |
980 |
990 |
740 |
740 |
Classifier speed regulating motor
(variable frequency motor) |
Model |
Y132M-4 |
Y180M-4 |
Y200L-4 |
YVP280M-4 |
| Power(kw) |
7.5 |
18.5 |
30 |
90 |
| Rotate Speed(rmin) |
1440 |
1470 |
1470 |
1470 |
| Centrifugal induced draft fan motor |
Model |
Y250M-4 |
Y315-4 |
Y315L2-4 |
Y315L2-4 |
| Power(kw) |
55 |
110 |
200 |
315 |
| Rotate Speed(rmin) |
1480 |
1480 |
1480 |
1480 |
| Elevator |
Bucket Model |
TH210 |
TH315 |
TH315 |
TB315 |
| Motor Model |
Y100L2-4 |
Y112M-4 |
Y112M-4 |
Y160M-4 |
| Motor Power(kw) |
3 |
3 |
4 |
11 |
| Rotate Speed(rmin) |
1430 |
1430 |
1440 |
1440 |
| Jaw Crusher |
Model |
PE250×400 |
PE250×750 |
PE250×750 |
PC1010 |
| Motor Model |
Y180L-6 |
Y200L2-6 |
Y200L2-6 |
Y315M2-6 |
| Power(kw) |
15 |
22 |
22 |
110 |
| Rotate Speed(rmin) |
970 |
970 |
970 |
990 |
| Magnetic Vibrating Feeder |
Model |
GZ2F |
GZ3F |
GZ4F |
GZ5F |
| Power(kw) |
0.15 |
0.2 |
0.45 |
0.65 |
Audited Supplier 
){kind=link}
){kind=link}