Brief introduction of the PEW Jaw Crusher
Jaw Crusher Jaw Crusher is mainly used for the crushing of materials whose compression strength is less than 300 MPa. The size of materials should be within the limits of the following technical parameters. In general, Jaw crusher is divided into two series, PE series and PEW series.
Working principle of the PEW Jaw Crusher
The strip and strip pulley are driven by a motor, and the moving jaw moves up and down via eccentric shaft. The angle between fixed jaw and moving jaw becomes smaller when the moving jaw runs down, then the materials are crushed into pieces. It will become bigger when the moving jaw runs up. The moving jaw board leaves the fixed jaw board under the action of pole and spring, and then the end products come out from the crushing cavity.
Main advantages of the PEW Jaw Crusher
1. Crushing cavity is deep and there is no dead area, which improves feeding capacity and output;
2. High reduction ratio and uniform final product size;
3. Spacing piece type discharge-hole adjustment device is reliable and convenient;
4. Reliable and safe lubrication system, convenient replacement of parts and small work load of maintenance;
5. Simple structure, operational reliability and low operation cost;
Main advantages of the PEW Jaw Crusher
1. Crushing cavity is deep and there is no dead area, which improves feeding capacity and output;
2. High reduction ratio and uniform final product size;
3. Spacing piece type discharge-hole adjustment device is reliable and convenient;
4. Reliable and safe lubrication system, convenient replacement of parts and small work load of maintenance;
5. Simple structure, operational reliability and low operation cost;
| Model |
Feed Opening (mm) |
Max Feeding (mm) |
Discharge Opening (mm) |
Capacity (t/h) |
REV (r/min) |
Power (kw) |
Motor Model |
Machine Size (mm) |
| PEW250×1000 |
250×1000 |
220 |
20-40 |
15-50 |
330 |
6-37 |
Y250M-6/37 |
1400×1850×1310 |
| PEW250×1200 |
250×1200 |
220 |
20-40 |
20-50 |
330 |
6-37 |
Y250M-6/37 |
1400×2050×1310 |
| PEW400×600 |
400×600 |
350 |
35-85 |
15-70 |
250 |
6-37 |
Y250M-6/37 |
1920×1460×1840 |
| PEW760 |
760×1100 |
620 |
75-200 |
150-350 |
270 |
6-110 |
Y315L1-6/110 |
2600×2500×2200 |
| PEW860 |
860×1100 |
720 |
100-225 |
200-500 |
240 |
6-132 |
Y315L2-6/132 |
3300×2320×3120 |
| PEW1100 |
1100×1200 |
930 |
150-275 |
300-650 |
210 |
8-185 |
Y355L1-8/185 |
4140×2660×3560 |
Audited Supplier 
){kind=link}
){kind=link}