1. Brief Introduction of the Flotation separator
Flotation separator is suitable for separation of non-ferrous metals, ferrous metals, precious metals, non-metallic mineral and chemical raw materials, recovering useful minerals. This machine has the features of the big suction capacity and low power consumption. Every slot has the triple function of suction, grout and flotation which become the complete flotation circuit without any auxiliary equipment installing the machine in a actinic line it will be easier for the flow process change, the rational slurry cycle and furthest reducing the coarse sand sinking.
2. Features of the Flotation separator
Flotation separator has the advantages of large air-absorption capacity and low energy consumption.
Every cell owns three functions: Air absorption, slurry absorption, and flotation separation, and the cells form a flotation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.
The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent.
There is self-control device on the surface of mineral slurry, so it is easy to adjust it.
The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.
3. Application of the Flotation separator
Flotation separator is applicable for the separation of nonferrous metal and ferrous metals, such as fluorite and talc. The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. While extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.
Flotation separator technical data:
Model | Effective volume (m³) | L x D x H (mm) | Diameter of impeller (mm) | Circular velocity of impeller (m/min) | Air suction amount (m³/m² .min) | Motor power (kw) | Capaity (m³/min) | Weight Of single tank (kg) |
| BF-0.25 | 0.25 | 650x600x700 | 250 | 6 | 0.9-1.05 | 1.5 | 0.12-0.28 | 370 |
| BF-0.37 | 0.37 | 740x740x750 | 286 | 7.2 | 0.9-1.05 | 1.5 | 0.2-0.4 | 470 |
| BF-0.65 | 0.65 | 850x950x950 | 300 | 7.35 | 0.9-1.10 | 3 | 0.3-0.7 | 932 |
| BF-1.2 | 1.2 | 1050x1150x1100 | 450 | 7.02 | 0.9-1.10 | 5.5 | 0.6-1.2 | 1370 |
| BF-2.0 | 2 | 1400x1450x1120 | 500 | 7.5 | 0.9-1.10 | 7.5 | 1.0-2.0 | 1750 |
| BF-2.8 | 2.8 | 1650x1650x1150 | 550 | 8.06 | 0.9-1.10 | 11 | 1.4-3.0 | 2130 |
| BF-4.0 | 4 | 1900x2000x1200 | 650 | 8 | 0.9-1.10 | 15 | 2.4-4.0 | 2585 |
| BF-6.0 | 6 | 2200x2350x1300 | 700 | 7.5 | 0.9-1.10 | 18.5 | 3.0-6.0 | 3300 |
| BF-8.0 | 8 | 2250x2850x1400 | 760 | 7.5 | 0.9-1.10 | 22 | 4.0-8.0 | 4130 |
| BF-10 | 10 | 2250x2850x1700 | 760 | 7.52 | 0.9-1.10 | 22 | 5.0-10 | 4500 |
| BF-16 | 16 | 2850x3800x1700 | 850 | 8.7 | 0.9-1.10 | 37 | 8.0-16 | 8320 |
| BF-20 | 20 | 2850x3800x2000 | 850 | 8.7 | 0.9-1.10 | 45 | 10.0-20 | 8670 |
| BF-24 | 24 | 3150x4150x2000 | 920 | 8.7 | 0.9-1.10 | 45 | 12.0-24 | 8970
|
Audited Supplier 
){kind=link}