Ce Certificated High Quality Superfine powder/micro pulverizer
Superfine powder/micro pulverizer application:
This type mtw Superfine powder/micro pulverizer is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability, such as: calcite, chalk,limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite,iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite,barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassiumore pumice, etc
Superfine powder/micro pulverizer Features:
1. The shovel is made of high manganese steel which is more durable and the blade can replace easily.
2. Cone gear whole transmission-compact conformation, convenient installation, reducing dissipation of energy.
3. Isolation type cyclone powder collector. Effectively improve the efficiency and precision of choosing powder.
4. The observe door and air inlet volute is in the same surface,voiding the eddy current effect and reducing energy consumption.
5. Optimization design for grinding roller grinding ring of main-spring pressurization, high-wearing feature.
6. Internal thin oil lubrication system. Advanced and reliable, prolong service life.
7. Curved duct. Loss of the air volume is small, the liquidity of material is good and not easy plugging material.
Superfine powder/micro pulverizer Working principle
1)Raw material which has been crushed to the size specified is elevated into a hopper from which the stuff is loaded. And then through the vibrating feeder ,the materials will transferred evenly and continuously into the Superfine powder/micro pulverizer grinding chamber for powder-processing. After this,the ground stuff is carried by the air from the blower into the classifer for regrinding.The set's airflow system is closely sealed up and circulated under the condition of negative and positive pressure. 2) The Superfine powder/micro pulverizer is driven by rotation of the central axle through decelerator ,with the up end of the axle connecting to a quincunx-rack upon which the grinding equipment is fixed. The whole set equipment turns together with the axle along the grinding ring while the rollers rotate driven by the fractional force .A set of shovel are installed at the lower end of the quincunx-rack.While turning together with the rollers ,the shovels shed the stuff onto the gap between the rollers and the ring ,and that's where the stuff layer forms .The rotating rollers ,while turning together with the ring ,grind the stuff layer into powder. 3) The turning speed of the impeller can be adjusted to the requirement of the fineness of powder products . 4)Superfine powder/micro pulverizer plays an important role in ensuring the function of the grinder . As the high-speed revolving air current mixed with ground stuff is flown into the cyclone-collector ,the ground stuff is separated from the air-current
Superfine powder/micro pulverizer technical data:
| Name & Model |
MTW110 |
MTW138 |
MTW175 |
MTW215 |
| Ring Roller Number(pcs) |
4 |
4 |
5 |
5 |
| Major diameter of roller(mm) |
360×190 |
460×240 |
520×280 |
640x 320 |
| Inner diameter of roller (mm) |
1100×190 |
1380×240 |
1750×280 |
2150x 320 |
| Revolving Speed(rmin) |
120 |
96 |
75 |
65 |
| Max.Feed Size(mm) |
<30 |
<35 |
<40 |
<50 |
| Final size(mm) |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.075,
fineness can reach to 0.038 |
| Capacity(th) |
3.5-10 |
6.5-15 |
13-20 |
30-45 |
| Overall dimension(mm) |
8625×7933×8642 |
10920×9470×10227 |
12275×9555×9916 |
14730x 10860x 10341 |
| Main unit motor |
Model |
Y280M-6 |
Y315M-6 |
Y355M2-8 |
Y3-355-4-8 |
| Power(kw) |
55 |
90 |
160 |
280 |
| Rotate Speed(rmin) |
980 |
990 |
740 |
740 |
Classifier speed regulating motor
(variable frequency motor) |
Model |
Y132M-4 |
Y180M-4 |
Y200L-4 |
YVP280M-4 |
| Power(kw) |
7.5 |
18.5 |
30 |
90 |
| Rotate Speed(rmin) |
1440 |
1470 |
1470 |
1470 |
| Centrifugal induced draft fan motor |
Model |
Y250M-4 |
Y315-4 |
Y315L2-4 |
Y315L2-4 |
| Power(kw) |
55 |
110 |
200 |
315 |
| Rotate Speed(rmin) |
1480 |
1480 |
1480 |
1480 |
| Elevator |
Bucket Model |
TH210 |
TH315 |
TH315 |
TB315 |
| Motor Model |
Y100L2-4 |
Y112M-4 |
Y112M-4 |
Y160M-4 |
| Motor Power(kw) |
3 |
3 |
4 |
11 |
| Rotate Speed(rmin) |
1430 |
1430 |
1440 |
1440 |
| Jaw Crusher |
Model |
PE250×400 |
PE250×750 |
PE250×750 |
PC1010 |
| Motor Model |
Y180L-6 |
Y200L2-6 |
Y200L2-6 |
Y315M2-6 |
| Power(kw) |
15 |
22 |
22 |
110 |
| Rotate Speed(rmin) |
970 |
970 |
970 |
990 |
| Magnetic Vibrating Feeder |
Model |
GZ2F |
GZ3F |
GZ4F |
GZ5F |
| Power(kw) |
0.15 |
0.2 |
0.45 |
0.65 |
Audited Supplier 
){kind=link}