Stone pulverizer Introduction:
stone pulverizer is designed by adopting advanced structure of similar products at home and abroad and bettering them in the industry. The Raymod Mill has higher grinding efficiency and lower energy consumption, smaller floor area and investment than that of the Ball Mill.
The long replacement cycle of the grinding roll and the grinding ring eliminates the shortcomings of the centrifugal crushing machine. The winnowing airflow of the machine works circularly from the draught fan, to the mill shell, cyclone separator and then back to the draught fan again. Therefore, the dust is less than that produced by the high speed Centrifugal Crusher, resulting in a clean operating workshop without polluting the environment.
Stone Pulverizer Application:
This Stone Pulverizer is mainly used to make the ore into powder,such as metallurgy,building materials, chemical and mining.Mine mill can product powder form various non-flammable and non-explosive mineral materials whose mohs hardness is below 9.3 and humidity below 6%,etc.
Working principle of Stone Pulverizer:
After the materials are ground, the host will inhale the wind into the cabinet inside the host for blowing powder. The powder is separated by the analyzer above the grinding chamber, with the over-thick materials being crushed again in the grinding chamber and the qualified materials getting into the cyclone collector following the wind. After collected, the materials are discharged by the powder discharge port as finished products.
The current returns to the draught fan from the return air duct on top of the large whirlwind collector. It forms a circular path and flows under negative pressure. The extra wind will be discharged from exhaust pipeline between the draught fan and the host to the small whirlwind collector for purification treatment.
When working, the to-be-crushed materials are added to the machine from the feeding port on the side of the housing. Relying on the grinding roller device hanging on the plum flower frame on the host, it revolves around the vertical axis during its self rotation. Due to the role of rotating centrifugal force, the grinding roll swings outside, tightly pressing the grinding ring, moving the materials scooped up by the shovel knife to the place between the grinding roller and grinding ring, and thus the purpose of crushing materials can be achieved.
Stone Pulverizer parameters:
Name & Model |
MTW110 |
MTW138 |
MTW175 |
MTW215 |
Ring Roller Number(pcs) |
4 |
4 |
5 |
5 |
Major diameter of roller(mm) |
360×190 |
460×240 |
520×280 |
640x 320 |
Inner diameter of roller (mm) |
1100×190 |
1380×240 |
Φ1750×280 |
Φ2150x 320 |
Revolving Speed(rmin) |
120 |
96 |
75 |
65 |
Max.Feed Size(mm) |
<30 |
<35 |
<40 |
<50 |
Final size(mm) |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.045,
fineness can reach to 0.038 |
1.6-0.075,
fineness can reach to 0.038 |
Capacity(th) |
3.5-10 |
6.5-15 |
11-25 |
30-45 |
Overall dimension(mm) |
8625×7933×8642 |
10920×9470×10227 |
12275×9555×9916 |
14730x 10860x 10341 |
Main unit motor |
Model |
Y280M-6 |
Y315M-6 |
Y355M2-8 |
Y3-355-4-8 |
Power(kw) |
55 |
90 |
160 |
280 |
Rotate Speed(rmin) |
980 |
990 |
740 |
740 |
Classifier speed regulating motor
(variable frequency motor) |
Model |
Y132M-4 |
Y180M-4 |
Y200L-4 |
YVP280M-4 |
Power(kw) |
7.5 |
18.5 |
30 |
90 |
Rotate Speed(rmin) |
1440 |
1470 |
1470 |
1470 |
Centrifugal induced draft fan motor |
Model |
Y250M-4 |
Y315-4 |
Y315L2-4 |
Y315L2-4 |
Power(kw) |
55 |
110 |
200 |
315 |
Rotate Speed(rmin) |
1480 |
1480 |
1480 |
1480 |
Elevator |
Bucket Model |
TH210 |
TH315 |
TH315 |
TB315 |
Motor Model |
Y100L2-4 |
Y112M-4 |
Y112M-4 |
Y160M-4 |
Motor Power(kw) |
3 |
3 |
4 |
11 |
Rotate Speed(rmin) |
1430 |
1430 |
1440 |
1440 |
Jaw Crusher |
Model |
PE250×400 |
PE250×750 |
PE250×750 |
PC1010 |
Motor Model |
Y180L-6 |
Y200L2-6 |
Y200L2-6 |
Y315M2-6 |
Power(kw) |
15 |
22 |
22 |
110 |
Rotate Speed(rmin) |
970 |
970 |
970 |
990 |
Magnetic Vibrating Feeder |
Model |
GZ2F |
GZ3F |
GZ4F |
GZ5F |
Power(kw) |
0.15 |
0.2 |
0.45 |
0.65 |