Zenith High Quality Micro Powder Raymond Mill for Iron Ore

• Type: Raymond Mill
• Motor Type: AC Motor
• Motor Power: 5.5KW
• Model NO.: MTW Series
• Rotationl Speed: 20-22r/min
• Application: Mine
• Materials: Stone and Ore
• Condition: New
• Warranty: for Whole Using Year
• After-sales Service: for Whole Using Year
• Spare Parts Supply: for Whole Year
• Test&Installation: Engineer Assigned
• After-Sale Service: for Whole Using Life
• Export Markets: Global
• Transport Package: Container, Nude Packs, in Bulk
• Specification: ISO9001: 2000
• Trademark: Zenith
• Origin: Shanghai Zenith, China
• HS Code: 8474209000
• Production Capacity: 80sets/Month
• Package Size: 60.00cm * 60.00cm * 60.00cm
• Package Gross Weight: 80.000kg

Product Description

ZENITH high quality Micro Powder raymond mill for iron ore

Micro Powder raymond mill for iron ore introduction:
 
This type Micro Powder raymond mill for iron ore is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability, such as: calcite, chalk,limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite,iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite,barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassiumore pumice, etc  

Micro Powder raymond mill for iron ore Features: 
 
1.High Efficiency
Under the same finished final size and the same motor power, the capacity of Micro Powder raymond mill for iron ore line,powder grinding machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
2.Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
3.High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
4.High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.
5.Environment-friendly
The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
Advanced intelligent speed control device
Convenient adjusting, more uniform particle size.

Micro Powder raymond mill for iron ore Working Principle
 
Firstly, raw material is crushed by jaw crusher to the size required, then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder, evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind.
After this, the ground stuff are carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The set's airflow system is closely sealed up and circulated under condition of negative and positive pressure.

Micro Powder raymond mill for iron ore application:

Micro Powder raymond mill for iron ore is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite,rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

Specifications of Micro Powder raymond mill for iron ore:

Name & Model		MTW110	MTW138	MTW175	MTW215
Ring Roller Number(pcs)		4	4	5	5
Major diameter of roller(mm)		360×190	460×240	520×280	640x 320
Inner diameter of roller (mm)		1100×190	1380×240	1750×280	2150x 320
Revolving Speed(rmin)		120	96	75	65
Max.Feed Size(mm)		<30	<35	<40	<50
Final size(mm)		1.6-0.045, fineness can reach to 0.038	1.6-0.045, fineness can reach to 0.038	1.6-0.045, fineness can reach to 0.038	1.6-0.075, fineness can reach to 0.038
Capacity(th)		3.5-10	6.5-15	11-25	30-45
Overall dimension(mm)		8625×7933×8642	10920×9470×10227	12275×9555×9916	14730x 10860x 10341
Main unit motor	Model	Y280M-6	Y315M-6	Y355M2-8	Y3-355-4-8
	Power(kw)	55	90	160	280
	Rotate Speed(rmin)	980	990	740	740
Classifier speed regulating motor (variable frequency motor)	Model	Y132M-4	Y180M-4	Y200L-4	YVP280M-4
	Power(kw)	7.5	18.5	30	90
	Rotate Speed(rmin)	1440	1470	1470	1470
Centrifugal induced draft fan motor	Model	Y250M-4	Y315-4	Y315L2-4	Y315L2-4
	Power(kw)	55	110	200	315
	Rotate Speed(rmin)	1480	1480	1480	1480
Elevator	Bucket Model	TH210	TH315	TH315	TB315
	Motor Model	Y100L2-4	Y112M-4	Y112M-4	Y160M-4
	Motor Power(kw)	3	3	4	11
	Rotate Speed(rmin)	1430	1430	1440	1440
Jaw Crusher	Model	PE250×400	PE250×750	PE250×750	PC1010
	Motor Model	Y180L-6	Y200L2-6	Y200L2-6	Y315M2-6
	Power(kw)	15	22	22	110
	Rotate Speed(rmin)	970	970	970	990
Magnetic Vibrating Feeder	Model	GZ2F	GZ3F	GZ4F	GZ5F
	Power(kw)	0.15	0.2	0.45	0.65