Hot Sale High Performance Clinker Mill (MTW110, MTW138, MTW175)

• Type: Raymond Mill
• Motor Type: AC Motor
• Motor Power: 7.5KW
• Model NO.: MTW110, MTW138, MTW175, MTW215
• Rotationl Speed: Various According to Different Model
• Application: Various According to Different Model
• Materials: Stone and Ore
• Condition: New
• Spare Parts Supply: for Whole Year
• After-Sale Service: for Whole Using Year
• Test&Installation: Engineer Assigned
• Export Markets: Global
• Transport Package: Container, Nude Packs, in Bulk
• Specification: CE, ISO
• Trademark: Zenith
• Origin: Shanghai Zenith, China
• HS Code: 8474209000
• Production Capacity: 4-85tph

Product Description

clinker mill introduction:

Zenith clinker mill is widely for micron powder producing. The output size can reach 2500mesh (5um). It is suitable to grind the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished product can be adjusted between 325-2500 mesh.



Features & Benefits of clinker mill :

1. High efficiency. Under the same condition of finished particle size and power of motor, the output of the Barite grinding plant is 40% higher than airflow mill and whisk mill.

2. Environmental protection. Pollution and noise are lightened by using deduster and muffler so as to reach the requirement of national environmental protection.

3. High safety. No axle tree or bolt is used in the grinding chamber, so there will be no worn out problem of bearing and sealing parts, and also no loose of bolts when using the Barite grinding plant

4. Finished size of the Barite grinding plant can reach to d97≤ 5μ m.

5. High using rate of spare parts.

clinker mill working principle

The working principle is as follows: Load the stuff for grinding evenly and continuously into the grinding chamber of the main frame. Due to the centrifugal force in rotation, the roller swings go outward and presses closely upon the ring. The shovel carries the stuff to the space between the roller and ring. When the roller rolls, the stuff is thus grinded.
After being grinded, the stuff is to be routed to the classifier along wind belt of the blower and the rough powder will be put back to the grinder for regrinding.


clinker mill technical data:
 

Name & Model		XZM221	XZM224	XZM236	XZM244
Ring roll number (pcs)		21	24	36	44
Working diameter (mm)		Φ800	Φ900	Φ1000	Φ1300
Grinding rill and roller path number (pcs)		1X3	2×4	1×4	2×4
Revolving Speed (rmin)		230-240	200-220	180-200	135-155
Max feed size (mm)		≤10	≤20	≤20	≤20
Final size (mesh)		325-2500	325-2500	325-2500	325-2500
Output (kgh)		400-4500	600-5500	400-7500	1200-12000
contour dimension (mm)		13000×3000×5800	14700×4800×8600	18000×4600×8600	14000×9000×10250
Whole machine capacity (kw)		144-165	185-204	263-290	380-430
Main motor	Model	YB2-250M-4	YB2-280M-8	YB2-315L1-6	YB2-315L2-6
	Power (kw)	55	45×2	110	160
	Rotate speed (rmin)	1440	980	990	990
Analytical engine (FM motor)	Model	Y180M-4	Y180L-4	Y100L1-4	YB2-225S-4
	Power (kw)	18.5	22	30	37
	Rotate speed (rmin)	1440	1440	1440	1440
Blower motor	Model	Y225M-2	Y250M-2	Y280M-2	YB2-250M-2
	Power (kw)	45	55	75	55×2
	Rotate speed (rmin)	2940	2940	2940	2940
Elevator	Bucket model	TH-200	TH-200	TH-300	TH-300
	Motor model	Y100L-4	YB2-100L2-4	YB2-112M-4	YB2-112M-4
	Motor power (kw)	3	3	4	4
	Rotate speed (rmin)	1440	1440	1440	1440
Hammer Crusher	Hammer Crusher model	PC300×400	PC400×600	PC400×600	PC600×800
	Motor model	YB2-160M-4	YB2-180M-4	YB2-180M-4	YB2-280S-6
	Power (kw)	11	18.5	18.5	45
	Rotate speed (rmin)	1440	1440	1440	990
Magnetic vibrating feeder	Model	GZ1F	GZ1F
	Power (kw)	0.06	0.06
Electrical machine	Model			LS159×1050	LS159×2000
	Power (kw)			2.2	3
Discharge valve	Discharge valve model	ZJD-200	ZJD-200	ZJD-200	ZJD-250
	Motor model	YB2-80M2-4	YB2-80M2-4	YB2-80M2-4	YB2-90S-4
	Power (kw)	0.75×2	0.75×2	0.75×3	1.1
	Rotate speed (rmin)	1440	1440	1440	1440
Pulse dust collectors	Model	DMC120-II model	DMC144-II model	DMC184-II model	DMC160-II model*2
Air compressor	Air compressor Model	KSH100D-7.5KW	KSH240D-15KW	KSH240D-15KW	KSH240D-15KW×2/td>
	Motor model	YB2-132M-4	YB2-160L-4	YB2-160L-4	YB2-160L-4
	Power (kw)	7.5	15	15	15
	Rotate speed (rmin)	1440	1440	1440	1440