Brief Introduction of Small Jaw Crusher for sale:
This series jaw crusher is mainly used for crushing ores and large materials. It can process various kinds of materials with crushing compression strength not up to 350Mpa. It has been widely applied in the areas of mining, metallurgy, highway, railway, construction, water conservancy and chemical industry, etc.
Jaw crusher of our PE series can process the large stones with high capacity primarily so that it becomes the first choice for primary crushing. The PEX series can be used as secondary crusher after the primary crushing. These series crushers have many specifications and also the feeding size is ranging from 125mm to 1020mm.
Working Principles of small jaw crusher for sale:
The motor drives the belt and belt wheel, and makes the movable jaw up and down by eccentric shaft. When the movable jaw falls, the angle between the movable jaw and fixed jaw gets smaller, then the materials can be crushed to reach the target of crushing. When the movable jaw rises, the angle between the movable jaw and fixed jaw becomes larger. The movable jaw plate leaves the fixed jaw plate under the function of draw bar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
Features of small Jaw Crusher for sale:
1. Simple structure, reliable operation and low consumption and cost
2. High capacity and large crushing ratio;
3. Reliable and safe lubrication system, convenient replacement of spare parts and small work load of maintenance;
4. The crushing cavity is deep and no dead corner which improves the feeding capacity and output
5. The discharging hole adjustment device is convenient and safe;
6. Large adjustment range of discharging hole can meet the demands of different users;
7. Energy-saving: single machine can save energy by 15% to 30%; the system can save energy by over 30% to 60%;
8. Low noise and little dust pollution.
Small Jaw crusher for sale parameters:
| Model |
Feed Opening (mm) |
Max Feeding (mm) |
Discharge Opening (mm) |
Capacity (t/h) |
REV (r/min) |
Power (kw) |
Motor Model |
Machine Size (mm) |
| PE200×350 |
200×350 |
170 |
20-50 |
2-6 |
220 |
6-7.5 |
Y160M-6/7.5 |
|
| PE250×400 |
250×400 |
210 |
20-60 |
5-20 |
310 |
6-15 |
Y180L-6/15 |
1450×1315×1296 |
| PE250×750 |
250×750 |
210 |
20-60 |
8-22 |
320 |
6-30 |
Y225M-6/30 |
|
| PE500×750 |
500×750 |
425 |
50-100 |
45-100 |
275 |
6-55 |
Y280M-6/55 |
1890×1916×1870 |
| PE600×900 |
600×900 |
500 |
65-160 |
70-120 |
250 |
6-75 |
Y315S-6/75 |
2520×1840×2303 |
| PE750×1060 |
750×1060 |
630 |
80-140 |
130-260 |
250 |
8-90 |
Y315L1-8/90 |
2620×2302×3110 |
| PE900×1200 |
900×1200 |
750 |
95-165 |
220-380 |
200 |
8-130 |
JR127-8/130 |
3789×2826×3025 |
| PE1000×1200 |
1000×1200 |
850 |
195-265 |
230-380 |
200 |
8-130 |
JR127-8/130 |
3889×2826×3025 |
| PE1200×1500 |
1200×1500 |
1020 |
150-300 |
400-800 |
220 |
8-200 |
YR355M4-8/200 |
4930×3150×3700 |
Audited Supplier 
){kind=link}