Sourcing PEW400*600 Stone Rock Jaw Crusher Manufacture in China:
Jaw Crusher Manufacture is ideally suitable for primary and secondary crusher for material with compression strength less than 320MPA. Jaw Crusher Manufacture is of high crushing ratio, larger capacity, well-distributed final product size, simple structure, reliable performance, convenient maintenance, lower operation cost, etc. It is widely used in mining, metallurgy, construction, highway, railroad, and water conservancy, etc
Features of Sourcing PEW400*600 Stone Rock Jaw Crusher Manufacture in China
1.Big capacity and energy saving: no dead zone, feeding and crushing efficiency is greatly improved.
2."V"-shape structure: the actual width of feed is the same as nominal width.
3.Good performance and good stability.
4.Lubrication system: safe, reliable and convenient, easy to maintenance.
5.Work long time: the internal structural precision greatly extend the life of equipment.
6.Adjustment device: increase the flexibility of the equipment.
7.Low noise and less dust.
8.Easy operation and maintenance, low operating costs.
Working Principle of Sourcing PEW400*600 Stone Rock Jaw Crusher Manufacture in China
The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft, when the movable jaw down, the angle between the fixed jaw and movable jaw gets smaller,
and the materials can be crushed to reach the crushing target, when the movable jaw rises, the angle between the fixed jaw and movable jaw becomes larger,
the movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
technical data of Jaw Crusher Manufacture:
|Feed Opening (mm)||Max Feeding (mm)||Discharge Opening (mm)||Capacity (t/h)||REV (r/min)||Power (kw)||Motor Model||Machine Size (mm)|