Zenith Hot Sale Marble Crusher Machine, Granite Crusher
The zenith Marble Crusher Machine, Granite Crusher has been developed to crush high or medium hardness material, such as iron ore, copper ore, limestone, quartz, granite, and sand stones, ect. And The crusher is used in metallurgical, construction, road building, chemical, silicate Industries. The cone crusher has the advantage of reliable construction, high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation. Cone crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing.Marble Crusher Machine, Granite Crusher Features:
1. Marble Crusher Machine, Granite Crusher by the change of the gap in the crushing cavity. The gap is opened and closed by the gyration of main shaft, which is derived by motor through cone gears.
2. The Marble Crusher Machine, Granite Crusher is of high reduction ratio, high performance, low power consumption, and uniform size products. The crusher machine has been used in the secondary and tertiary crushing.
3. Marble Crusher Machine, Granite Crusher consists of body frame, transmission shaft, eccentric sleeve, cone bearing, breaking cone, supporting sleeve, adjusting sleeve, feeding part, spring, elastic coupling, lubrication part, electric part, ect.Marble Crusher Machine, Granite Crusher technical data:
|Model||Movable Cone Diametermm (inch)||Chamber Style||Opening Side||Closed Side||Discharging Opening (mm)||REV (r/min)||Power (kw)||Motor Model||Capacity (t/h)||Machine Size (mm)|
|36(3′)||900 (3′)||medium||83||102||9-22||580||6-75||Y315S-6/75||45-91||2821×1880 ×2164|
|36(3′)||914 (3′)||fine||13||41||3-13||580||6-75||Y315S-6/75||27-90||2821×1880 ×2410|
|51(4.25′)||1295 (4 1/4′)||fine||109||137||13-31||485||6-185||Y355M2-6/185||109-181||2800×2342 ×2668|
|51(4.25′)||1295 (4 1/4′)||fine||29||64||3-16||485||6-160||Y355M1-6/160||36-163||2800×2342 ×2668|
|66(5.5′)||1650 (5 1/2′)||fine||188||209||16-38||485||6-240|| ||181-327||3911×2870 ×3771|
|66(5.5′)||1650 (5 1/2′)||fine||35||70||5-13||485||6-240|| ||90-209||3917×2870 ×3771|
|84(7′)||2134 (7′)||fine||253||278||19-38||435||6-400|| ||381-726||5200×4300 ×4700|
|84(7′)||2134 (7′)||fine||51||105||5-16||435||6-400|| ||190-408||5200×4300 ×4700|