Factory direct supplier mobile ore crushing processing plant
step1:Crushing-- Put the ingredients broken
1)introduction: Due to the volume of gold ore produced is too large , so it is necessary to the mined ore crushing. In this process , send the ore into the grinder device to crushed . In general, The System requirements of the ore particle size for general 12mm------18mm.
step2:Grinding--The processing of raw materials carefully
1) Process introduction: In this process, we must first make clear the requirements for each ore solution particle standards, Based with the aid of various equipment, put all sorts of ore grinding to separation units required unit solution size.
2).Main Equipment:Feeder,Ball Mill,Classifier, Cyclone,High frequency screen,Lattice mill,Overflow ball mill,etc.
step3: Sorting --Select fine ore powder
1).Process introduction: In the production process,not all the ore powder are in line with the standard . we need to filter the ore powder . In this process We use professional equipment to elect qualified concentrate powder from ore , eliminated does not meet the criteria for ore.
2).Main Equipment:Mixing drum,Flotate separ ator,magnetic separator, Centrifugal gold machineetc.
step4:Dehydration --Take off water in the ore
1).Process introduction: Due to various constraints, after the front of several processes , there are always some residual moisture in the ore powder, then we ne ed to pick out concentrate dehydration, to meet the requirements of transportation and smelting.
2.)Main Equipment:Vacuum filter,Box pressure filter,Folding belt filter,Ceramic filter,Vacuum pump, Driving thickener,etc.
mobile ore crushing processing plant Flowsheet by Flotation Separation
Step 1 is crushing: use kinds of crushers to crush the raw massive ore into gravels within 25mm.
step 2 is grinding: use ball mill to grind the gravels into fine powders about 0.074mm
step 3 is roughing concentrate: use gravity separation to concentrate the heavy minerals, such as centrifugal concentrator, spiral chute, jig machine, etc.
step 4 is fine concentrate: a shaking table is usually the equipment for precise selection to get fine concentrate.
Final. you can refine the fine gold concentrate to get gold.
mobile ore crushing processing plant Flowsheet by Gravity Separation
In general ,the complete set mobile ore crushing processing plant composes of many types of equipment, such as crusher, vibrating feeder, belt conveyor, ball mill, spiral classifier, vibrating screen, spiral separator, centrifugal concentrator, shaking table, flotation machine, gold melting furnace, mercury amalgamator,etc.
mobile ore crushing processing plant --jaw crusher technical data:
| Model |
Feed Opening (mm) |
Max Feeding (mm) |
Discharge Opening (mm) |
Capacity (t/h) |
REV (r/min) |
Power (kw) |
Motor Model |
Machine Size (mm) |
| PEW250x1000 |
250x1000 |
220 |
20-40 |
15-50 |
330 |
6-37 |
Y250M-6/37 |
1400x1850x1310 |
| PEW250x1200 |
250x1200 |
220 |
20-40 |
20-50 |
330 |
6-37 |
Y250M-6/37 |
1400x2050x1310 |
| PEW400x600 |
400x600 |
350 |
35-85 |
15-70 |
250 |
6-37 |
Y250M-6/37 |
1920x1460x1840 |
| PEW760 |
760x1100 |
620 |
75-200 |
150-350 |
270 |
6-110 |
Y315L1-6/110 |
2600x2500x2200 |
| PEW860 |
860x1100 |
720 |
100-225 |
200-500 |
240 |
6-132 |
Y315L2-6/132 |
3300x2320x3120 |
| PEW1100 |
1100x1200 |
930 |
150-275 |
300-650 |
210 |
8-185 |
Y355L1-8/185 |
4140x2660x3560 |
mobile ore crushing processing plant --ball mill technical data:
| Model |
Rotate Speed (r/min) |
Grinding Media Weight (T) |
Feeding Size(mm) |
Discharge Size (mm) |
Output(t/h) |
Motor Power (KW) |
Weight (T) |
| 900×1800 |
36~38 |
1.5 |
≤20 |
0.075-0.89 |
0.65-2 |
18.5 |
4.6 |
| 900×3000 |
36 |
2.7 |
≤20 |
0.075-0.89 |
1.1-3.5 |
22 |
5.6 |
| 1200×2400 |
36 |
3 |
≤25 |
0.075-0.6 |
1.5-4.8 |
30 |
12 |
| 1200×3000 |
36 |
3.5 |
≤25 |
0.074-0.4 |
1.6-5 |
37 |
12.8 |
| 1200×4500 |
32.4 |
5 |
≤25 |
0.074-0.4 |
1.6-5.8 |
55 |
13.8 |
| 1500×3000 |
29.7 |
7.5 |
≤25 |
0.074-0.4 |
2-5 |
75 |
15.6 |
| 1500×4500 |
27 |
11 |
≤25 |
0.074-0.4 |
3-6 |
110 |
21 |
| 1500×5700 |
28 |
12 |
≤25 |
0.074-0.4 |
3.5-6 |
130 |
24.7 |
| 1830×3000 |
25.4 |
11 |
≤25 |
0.074-0.4 |
4-10 |
130 |
28 |
| 1830×4500 |
25.4 |
15 |
≤25 |
0.074-0.4 |
4.5-12 |
155 |
32 |
| 1830×6400 |
24.1 |
21 |
≤25 |
0.074-0.4 |
6.5-15 |
210 |
34 |
| 1830×7000 |
24.1 |
23 |
≤25 |
0.074-0.4 |
7.5-17 |
245 |
36 |
| 2100×3000 |
23.7 |
15 |
≤25 |
0.074-0.4 |
6.5-36 |
155 |
34 |
| 2100×4500 |
23.7 |
24 |
≤25 |
0.074-0.4 |
8-43 |
245 |
42 |
| 2100×7000 |
23.7 |
26 |
≤25 |
0.074-0.4 |
8-48 |
280 |
50 |
| 2200×4500 |
21.5 |
27 |
≤25 |
0.074-0.4 |
9-45 |
280 |
48.5 |
| 2200×6500 |
21.7 |
35 |
≤25 |
0.074-0.4 |
14-26 |
380 |
52.8 |
| 2200×7000 |
21.7 |
35 |
≤25 |
0.074-0.4 |
15-28 |
380 |
54 |
| 2200×7500 |
21.7 |
35 |
≤25 |
0.074-0.4 |
15-30 |
380 |
56 |
| 2400×3000 |
21 |
23 |
≤25 |
0.074-0.4 |
7-50 |
245 |
54 |
| 2400×4500 |
21 |
30 |
≤25 |
0.074-0.4 |
8.5-60 |
320 |
65 |
| 2700×4000 |
20.7 |
40 |
≤25 |
0.074-0.4 |
12-80 |
400 |
94 |
| 2700×4500 |
20.7 |
48 |
≤25 |
0.074-0.4 |
12-90 |
430 |
102 |
| 3200×4500 |
18 |
65 |
≤25 |
0.074-0.4 |
According to the process condition |
800 |
137 |
Audited Supplier 
){kind=link}
){kind=link}