wholesale price high quality hammer stone crusher
hammer stone crusher introduction:
This European Series hammer stone crusher is widely used in metallurgy, mining, chemical, cement, construction, industrial and mining industries, and used in medium and fine crusher. The compressive strength is not over 320Mpa.
This hammer stone crusher is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. It works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer stone crusher. Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.
hammer stone crusher benefits:
1. High production capacity, high crushing ratio.
2. Low power consumption, uniform particle size.
3. Simple structure, easy to operate.
4. Low investment cost, easy management.
Working Principle of hammer stone crusher:
The European hammer stone crusher casing, rotor, bearing the hammer and the grate bars and other components. Upper and lower case in two parts, welded together by a steel plate after cutting, the remaining parts bolted into one. Set with high manganese steel liner inside the case, to facilitate replacement of worn; Its array of rules installed on the spindle distribution of the hammer, hammer and rotary table and through the rotor shaft formed. Host through the motor, V-belt driven spindle, so that the rotor rotates, hammer by the centrifugal force generated by rotation around the stretch to, bulk materials from the feed inlet into the crushing chamber, the high-speed movement of the hammer will be crushed. Broken by passing the material under.
hammer stone crusher technical data:
| Name & Model |
HM4008-75 |
HM4012-90 |
HM4015-132 |
| Rotor diameter(mm) |
750 |
900 |
1150 |
| Rotor length(mm) |
800 |
1200 |
1500 |
| Rotor speed(r\m) |
800-1000 |
800-1000 |
550-800 |
| Feeding size (mm) |
320×930 |
400×1200 |
500×1500 |
| Max feed size(mm) |
<30 |
<40 |
<50 |
| Discharge size(mm) |
0-3 |
0-3 |
0-8 |
| Theory processing capacity(t\h) |
8-15 |
15-40 |
40-70 |
| Motor |
Model (Standard) |
Y280S-4 |
Y280M-4 |
Y315L2-6 |
| Power (kw) |
75 |
90 |
132 |
| Rotate speed (r\m) |
|
|
|
| Hammer number (pcs) |
18 |
32 |
32 |
| Dimension (L×W×H\mm) |
2130×1665×1610 |
2840×2100×2020 |
3720×2650×2540 |
Audited Supplier 
){kind=link}
){kind=link}