China Manufacturer Rock Crushing Machine hammer stone crusher
This European Series hammer stone crusher is widely used in metallurgy, mining, chemical, cement, construction, industrial and mining industries, and used in medium and fine crusher. The compressive strength is not over 320Mpa.
This hammer stone crusher is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. It works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer stone crusher . Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.
hammer stone crusher benefits:
1. High-efficient energy-saving: 30% power consumption reduced at equivalent output.
2. Super-fine Crushing capability: The newly added particle size adjusting mechanism has guaranteed the fineness of 80% of the particles at the discharge is controlled within 3mm.
3. New type of high quality alloy material with multiple V-Mo elements has made both ends of the tips detachable for use with ultra-long service life more than 3-4 times of the original life.
4. Short-stroke operation: Higher crushing ratio and Gr.I&Gr.II clinkers and Gr.II &Cr.III limes may be incorporated into Gr.III for crushing operation.
5.Easy in Maintenance: The rear cover of the upper machine box may be hydraulically (hand)-operated for replacing of the parts so as to facilitate maintenance.
hammer stone crusher technical data:
| Name & Model |
HM4008-75 |
HM4012-90 |
HM4015-132 |
| Rotor diameter(mm) |
750 |
900 |
1150 |
| Rotor length(mm) |
800 |
1200 |
1500 |
| Rotor speed(r\m) |
800-1000 |
800-1000 |
550-800 |
| Feeding size (mm) |
320×930 |
400×1200 |
500×1500 |
| Max feed size(mm) |
<30 |
<40 |
<50 |
| Discharge size(mm) |
0-3 |
0-3 |
0-8 |
| Theory processing capacity(t\h) |
8-15 |
15-40 |
40-70 |
| Motor |
Model (Standard) |
Y280S-4 |
Y280M-4 |
Y315L2-6 |
| Power (kw) |
75 |
90 |
132 |
| Rotate speed (r\m) |
|
|
|
| Hammer number (pcs) |
18 |
32 |
32 |
| Dimension (L×W×H\mm) |
2130×1665×1610 |
2840×2100×2020 |
3720×2650×2540 |
Audited Supplier 
){kind=link}
){kind=link}